Description
8 and 16 Shaft Design Double Layer Forming Bottom Wire for Tissue Paper Machine, 2.5 Layer Design, Best Combination of FSI anad Drainage
Made by Modern Heatsetting Tables and Testing Equipment
Keylife’s forming fabrics are available in a wide variety of meshes, depending on the type of paper produced. Coarse mesh fabrics are used to manufacture heavy paper grades such as those used in the production of corrugated boxes. Very fine mesh fabrics are required for lightweight paper, such as writing paper, book paper and magazine paper.
Two and a half layer forming fabric is a 8/16-shed,double and a half layer wire. This wire has an 8-shed weave with additional transverse strands, knows as support strands, on the paper side. With this design, a good sheet support, high evenness and good retention can be provided. At the same time, the wire has 16-shed big span weave on the back side and the bottom weft uses a coarse yarn to improve running life.
This 2.5 layer design brings a high dewatering capacity and stability in both MD and CD.
Scope of applications:
A two and a half layer forming fabric can be used to make printing paper, newspaper, offset paper, cardboard paper, tissue paper and the base pulp of the board paper.....
KEYLIFE is a professional manufacturer of paper machine clothing and filter belt in China. The plant ranks one of top 5 in the industry in the country, with a registered capital of USD 19 Million and an annual sale over USD 10 Million.